How To Attach a Sleeping Bag To a Backpack: A Step-By-Step Guide
by John
TweetShareSharePin0 Shares
Most people have their own sleeping bags in order to take care of themselves when on an outdoor adventure such as camping out overnight in the wilderness. Still, many don’t know how best to attach it securely onto their backpack before setting off!
Here’s how to attach a sleeping bag to a backpack; we’ll go over all the steps necessary and offer some tips along the way. It may seem complicated at first glance, but once you get used to this process, it becomes second nature.
Table of Contents
Packing Your Sleeping Bag Inside The Backpack
The first step in how to attach a sleeping bag to a backpack is to pack your sleeping bag inside the backpack. This may seem like an obvious point, but it’s easy to forget if you’re not used to doing so!
Ensure that all the straps are tucked away before you place the sleeping bag into the backpack. Straps should be folded neatly under their own weight and carefully placed out of sight near where they rest on top of each other as this will help them keep their shape for longer.
Place one hand underneath and two over at either side when sliding or rolling up your sleeping back; hold onto both ends with one hand while gripping firmly around the middle with the other.
Use your body weight to push down on the sleeping bag when rolling it up so that you can avoid creating a bulge in one area and ensure that all of its contents are secured inside.
When packing for an overnight stay, be sure not to pack anything else in addition to your sleeping bag, as this will only make things more cramped!
Securing Your Sleeping Bag Inside The Backpack Properly
Bring together all those loose strings on either side of your backpacks – these are often found at either corner. Tie them up tightly into a double knot before running them through loops at the base of the pack’s waist belt; pull it tight and tie them off on the other side.
The top of your sleeping bag can be secured, either using a string or cord (see step one) or with an elastic band if you’ve got one handy; this will keep things from moving around too much inside as well as making it easier to untie when you’re ready to unpack. If not, then just tuck the opening into any loose space in the main compartment for now.
Repeat step two on the other side of your backpack. You will now have a long string or cord running from one loop at the base of your pack’s waist belt to another, passing through loops in both corners and back to where you began.
Tuck that loose end into any available space inside your bag for safekeeping; this is meant as an emergency measure only – we want it securely tucked away so it doesn’t get caught on anything during travel. Now tie off with a knot by tying all those strings together tightly before pulling them taut and securing them. Keep these knots nice and tight!
Next, take those loose ends and wrap them around the top of your pack. There will be a “loop” or opening at each end where you can tie off with another knot to secure it in place once more. Now we’re ready to hang this sleeping bag up!
Find an appropriate tree branch that’s about shoulder height by standing next to it (don’t attempt from too far away). Wrap one side over the branch – usually on the left side if you’re right-handed – then cross under with its counterpart before wrapping all the way back around, so both sides overlap again.
To do the same with the other side, first wrap one string over and under before going back around as we did for the opposite end. Then clip it onto the second looped string.
Finally, fasten this carabiner to a branch that’s about chest height by wrapping each of those loose ends once more around in your desired direction. Now we’re good! If you want to make sure they stay put overnight or during windy weather, just tie them off tightly again at either end – but not too tight because that will cut into your sleeping bag fabric.
How To Attach a Sleeping Bag To a Backpack: A Step-By-Step Guide…
Step One:
Find a place on your backpack where you think the sleeping bag’s straps will fit. Ideally, this spot is near the top of your pack with plenty of room to spare for when it expands.
Step Two:
Loop one strap over each side and then wrap both ends around until they cross in the front at about waist height. Use carabineers or some other type of clip to secure them together so that there’s no chance of them coming loose later on during travel.
Step Three:
Put things into your pack like you normally would, arranging heavier items close to and against the back panel while placing lighter ones higher up nearer to where you’ll carry them onto your shoulders. When done properly, the straps should be touching your pack, with a little slack dangling from them.
Step Four:
Now, you need to adjust the tightness of the sleeping bag’s straps so that they’re snug against your pack and can’t slip off it without some effort on your part.
Step Five:
Then use those same carabineers or clips again to attach each strap in place around both sides of your backpack, where you determined earlier as being safe for attaching it at waist height.
This may seem like overkill, but there are many times when people will put their packs down and then forget about them for hours while exploring somewhere new! And if this is how things are done correctly, then trips home won’t always end up becoming three-hour ordeals because the straps have come undone.
Step Six:
Now, you’ll notice that in this configuration, the sleeping bag’s bottom will be dangling freely underneath your pack and is essentially acting as its “tail.”
You can make it more convenient by simply clipping together those two carabineers to form a loop for connecting onto one of the belt loops on either side of your backpack.
Step Seven:
In order to position the other end around where it needs to go (around or under whatever part of your body), just clip them both into place again with another set of carabineers, so they’re easy to reach while wearing gloves or mittens!
Then all that’s left is making sure everything fits comfortably before setting off for the day.
Step Eight:
If you need to tie a knot, it’s easiest by first wrapping one end of the rope around your hand and then looping the other around it before making a “bunny ear” out of them. Pull tight with both hands and adjust as desired!
Step Nine:
For the opposite end, be sure to clip both ends of your rope into a carabineer, so they’re easy to reach.
Step Ten:
Weigh down these loops with rocks or leaves for extra stability and safety.
Attaching Your Sleeping Bag To The Outside Of Your Backpack
Despite what many people might tell you, it’s not necessary to attach your sleeping bag to the outside of your backpack – but if you want to do so and have an extra strap or two at hand, we can show you how.
This process is a little more complicated than our previous step because there are several steps involved in securing both sides of the back panel; this will make sure that no part of the pack swings away from you as you go about your hike.Â
The first thing is tying off one end: find a loop on your shoulder harness (or any other available space) and tie that cord knot around it. Make sure this knot is very secure!
Next, take the other end of your cord and tie it to the pack straps on one side. Make sure you are tying around a strong part of that strap so as not to have any problem with wear or tear over time; this is where having an extra shoulder harness loop comes in handy! Take care when pulling both cords tight and making these knots very secure by cinching them tightly together (not enough slack for anyone’s hands to wander anywhere).
Now, put the sleeping bag on your back and make sure it is firmly secured! One way to do this is by cinching down one of those side straps that you just attached with a cord; then tuck the other end around in some clever manner like under a clothing strap or something.
Repeat for all four sides of the pack. You should now have two cords coming out from either shoulder harness loop–one going up over each shoulder and meeting at the top above your head where they can be tied together (a bow knot works well).Â
Make sure these knots are very tight so as not to come undone if you happen to brush against them while hiking! Now take care when pulling both cords tight and making these knots, as you may have some difficulty breathing for a moment!
Now, put the sleeping bag on your back and make sure it is firmly secured. One way to do this is by cinching down one of those side straps that you just attached with a cord; then tuck the other end around in some clever manner like under a clothing strap or something.
Repeat for all four sides of the pack. You should now have two cords coming out from either shoulder harness loop–one going up over each shoulder and meeting at the top above your head where they can be tied together (a bow knot works well). Make sure these knots are very tight so as not to come undone if you happen to brush against them while hiking!
Conclusion
The end! We hope you enjoyed this article about how to attach a sleeping bag to a backpack.
Please be sure to leave comments and feedback below, and we love hearing from our readers.
John
I am John, an outdoor gear staff expertise with tons of practical knowledge. My favorite hobby is moving around the world and adventurous in all the parts of the earth. I have been a worldwide traveler for over 10 years now with no sign of slowing down. I’m happily espoused and residing with my kids in California.
We are bag factory,supplier from China.We provide customization for diaper bag,sneaker bag,tool bag,picnic bag,pet bag,ski bag,food delivery bag,and so on.We provide free bag artwork or design service.Can help you to do DDP service and we accept small quantity for test order.We have BSCI and ISO audit,no problem for REACH,LFGB,CE,FDA ,CPC,CPSIA and ASTM test reports or certificates.
TweetShareSharePin0 Shares
John
Mobile/What's App/Wechat
E-Mail
ADD
