Custom Long Fin Bag Manufacturer — Freediving & Spearfishing OEM Since 2014
A long fin bag is built for the long-bladed freediving or spearfishing fins (typically 75–90 cm or longer) that ordinary gear bags simply cannot hold. Its job: protect the blade, foot pocket and blade tip, keep wet gear draining, and make carrying a 90 cm pair manageable on the trip to the water. At JUNYUAN BAGS we custom-make long fin bags for freediving and spearfishing brands worldwide — OEM/ODM from our affiliated production base in Quanzhou, China (company established in 2014, founder in the bag industry since 2004). Standard MOQ is 500 pcs, sampling takes 6–10 days and bulk production 35–50 days under AQL 2.5. “Long fin bag” sees roughly 880 US searches a month — a focused niche where a great, correctly-sized carrier wins repeat brand orders.
Long Fin Bag vs. Standard Fin Bag — What Differs
| Feature | Long Fin Bag | Standard / Short Fin Bag |
|---|---|---|
| Fin length | 75–90+ cm sleeve | up to ~40 cm |
| Blade-tip protection | reinforced tip pad | basic |
| Drainage | mesh + drain holes for wet fins | minimal |
| Carry | dual strap / backpack option | single strap |
This page owns the long fin / spearfishing long fin intent. If you carry a single wide monofin, see our custom monofin bag line; for general freediving carriers, our custom freediving bag page.
Design Essentials for Long Fins
- Length: reinforced 90, 95 and 105 cm sleeves matched to blade length.
- Blade-tip protection: dedicated padded tip pocket stops rail and rail-edge damage in transit.
- Drainage: mesh sections and drain holes so wet fins dry fast.
- Carry: adjustable shoulder strap plus an optional backpack variant for walk-to-water.
Our Long Fin Bag Product Line
1. Long Fin Bag
A 95 cm nylon sleeve with blade-tip pad and mesh vent for everyday long-fin carry.
2. Bifin Bag
A twin-fin configuration sized for shorter bifins, with separate compartments and padded rail.
3. Long Fin Travel Backpack
Backpack straps and a carry-on-friendly profile for divers travelling with long fins.
4. Spearfishing Long Fin Bag
A spearfishing-specific long sleeve with reinforced tip and wet-gear drainage for coastal hunting trips.
Materials & Craft
- Fabric: 600D PVC-coated and 900D polyester; ripstop options.
- Ventilation: mesh breathable zones for wet gear.
- Closures: adjustable straps and YKK waterproof zippers where specified.
- Seams: heat-sealed and RF-welded seams from our waterproof line.
See our material selection guide, the zippers & seams guide and the dry bag manufacturing guide for full spec detail.
Freediving Long Fins vs. Spearfishing Long Fins
Freediving long blades are stiffer and lighter and usually ride in a snug single-sleeve bag with a tip pocket; spearfishing blades are often longer (up to 110 cm) with heavier foot pockets, so we build a slightly larger, better-draining sleeve. Tell us your blade brand and length and we will match the internal footprint.
Customisation & MOQ / Sampling / Production
From a custom long fin bag to a full ODM project, we offer logo printing (screen print, embroidery, woven label, heat transfer), colourways, sizing, inner config and custom packaging. Need long fin bag wholesale pricing? Send your spec and we quote in 24–48 h.
- MOQ: 500 pcs (standard).
- Sampling: 6–10 days; sample charged at cost, refunded on bulk.
- Bulk production: 35–50 days.
- QC: AQL 2.5 with pre-shipment inspection at our SGS-verified affiliated production base.
FAQ
1. What size long fin bag do I need?
Match it to your blade length — we make 90, 95 and 105 cm sleeves.
2. Will it fit spearfishing long fins?
Yes — we offer a spearfishing variant with a longer (up to 110 cm) sleeve.
3. Is it waterproof?
Yes — YKK waterproof zipper and coated fabric, while wet gear drains through mesh sections.
4. Do you offer backpack straps?
Yes — a long fin travel/backpack variant with dual straps is available.
5. What is the MOQ?
Standard MOQ is 500 pcs.
6. How long do sampling and bulk production take?
Sampling 6–10 days; bulk production 35–50 days.
7. Can you do my logo?
Yes — private label with screen print, embroidery, woven label or heat transfer.
8. Why is a protected blade tip important?
It prevents rail and blade damage during transport and storage of expensive long fins.
9. Do you make bifin bags?
Yes — we offer a twin-fin bifin bag variant.
10. How do I get a quote?
Email [email protected] or WhatsApp +86 17750020688 with your spec.
Get a Free Quote
Request a free quote or sample — tell us your blade length and how you travel.
Email: [email protected] ｜ WhatsApp: +86 17750020688
