Picnic Backpack For 2 With Complete Cutlery Set And Cooler

Description

Set Contents: A Two-Person Kit For Date-Night Use

A two-person kit succeeds or fails on how quietly it carries. Every hard item needs its own pocket, because two plates and two glasses rattling against each other is the complaint that kills repeat purchase on this format.

Our standard bill of materials holds each item in a dedicated slot: plates in a padded sleeve, glasses in elasticated loops, cutlery in a zip roll. The whole tableware panel unzips and lies flat, so serving on grass does not mean unpacking the bag.

Detachable Six-Litre Cooler And Wine Holder

The cooler detaches on four 20 mm side-release buckles and holds 6 L — enough for a two-person meal plus two chilled drinks. Walls are 5 mm EPE with a welded PEVA liner and a 8 mm lid pad; there is no stitch line through the wet zone, which is the defect that turns a cooler into a leak.

Measured retention: with one 300 g freezer pack and pre-chilled contents, the compartment held 4°C for 4 hours and stayed under 8°C for 8 hours at 25°C ambient. The wine holder sits outside the cooler so a bottle stays upright and label-forward while the bag is on your back.

• Four 20 mm side-release buckles, detachable in under two seconds
• Welded PEVA liner with no stitch penetration in the wet zone
• 8 mm EPE lid pad and continuous foam gasket
• External elastic wine holder, 750 ml upright
• Front drain plug for meltwater

Stylish Format: Silhouette, Palette And Trim

The two-person bag is bought as a gift as often as a tool, so silhouette matters. This model uses a slim 20 cm depth rather than a boxy 25 cm, a rolled top handle in matching webbing, and a contrast lining that reads as deliberate when the bag is open on a blanket.

Trim is where a stylish programme is won: brushed zinc-alloy zipper pulls instead of plastic, a leather-look PU grab tab, bound internal seams in a contrast colour, and a woven flag label rather than a printed one. Each of those is a low-cost change that lifts perceived value.

Carry Comfort At A Two-Person Load

A loaded two-person kit weighs 4.5-6 kg, which sits below the threshold where a waist belt is worth the complexity. The harness is therefore 45 mm padded shoulder straps with a 20 mm sternum strap, plus a ventilated 5 mm spacer-mesh back panel.

The back panel is where a lightweight bag is usually cheapened, and it is the first thing a buyer notices in summer. Spacer mesh plus a 2 mm HDPE insert keeps the bag from collapsing into the lumbar spine when the cooler is full.

Materials And Food-Contact Compliance

Shell is 600D polyester with a 300 mm PU backing; the cooler liner is 0.4 mm welded PEVA, chosen over PVC because it is chlorine-free and needs no plasticiser migration testing. Plates are food-grade melamine and cutlery is 18/8 stainless steel.

All food-contact components are supported by EU 10/2011 and FDA 21 CFR 177 declarations. The optional blanket is 240 gsm anti-pill fleece certified to OEKO-TEX Standard 100 class II.

How The Two-Person Format Differs From The Four-Person Kit

The two formats are separate programmes on purpose. This bag carries 22 L and a 6 L cooler with no waist belt, because a 5 kg load does not need one; the four-person kit runs 40 L with an 8 L cooler and a load-bearing waist belt for an 8-10 kg load.

The difference is not plate count. It is body volume, cooler volume, harness architecture and tableware stowage: this bag uses a zip-out tableware sleeve, while the four-person kit uses a rigid drawer that can be set down as a tray.

• 22 L body and 6 L cooler versus 40 L and 8 L
• Shoulder-and-sternum harness versus shoulder, sternum and waist belt
• Zip-out tableware sleeve versus rigid zip-out drawer
• 4.5-6.5 kg packed versus 8.5-11.5 kg packed
• Slim 20 cm depth for gift retail versus 28 cm depth for volume

Inspection Standards

Cooler integrity is the highest-risk attribute on a picnic kit, so every cooler is air-pressure tested at 0.3 bar for 30 seconds before packing, and a three-piece sample per lot is retention-tested for 4 hours at 25°C.

Tableware is checked 100% for chip and glaze defects. Inline checks run at 30% and 70%, with final random inspection to ANSI/ASQ Z1.4 Level II at AQL 2.5 major and 4.0 minor.

Sampling, Production And Gift Packing

A stock sample ships in 6-10 business days. A custom print with a bespoke lining and a leather-look trim change needs 12-15 business days. Bulk production runs 35-50 days from print-proof and lab-dip approval.

Because this format sells as a gift, packing is part of the product: a printed gift box with a die-cut window and a ribbon handle, or a fabric stuff bag with a woven label. Gift boxing adds 0.04 cbm per carton against polybag packing.

Related Models In This Programme

Buyers comparing formats usually shortlist best selling picnic backpack for 2 person alongside this model, and picnic backpack set with detachable wine holder for the adjacent specification. Both run on the same 500-piece minimum, the same 6-10 business day sampling cycle and the same AQL 2.5 major / 4.0 minor inspection standard, so a mixed order can ship as one consolidation.

Frequently Asked Questions

What is included in the picnic backpack for 2?

Two 8-inch melamine plates, two stainless-steel cutlery sets, two 200 ml stemmed PS glasses, two cotton napkins, a 6 L detachable insulated cooler with welded PEVA lining, and an external elastic wine holder that takes a 750 ml bottle upright. A 120 × 120 cm fleece blanket is available as an option.

How long does the 6 L cooler keep food cold?

With pre-chilled contents and one 300 g freezer pack, the compartment held 4°C for 4 hours and stayed under 8°C for 8 hours at 25°C ambient. Walls are 5 mm EPE with an 8 mm lid pad and welded PEVA liner, and no stitching passes through the wet zone.

Does the cooler detach from the backpack?

Yes, it releases on four 20 mm side-release buckles in under two seconds, so it can go to the table or into a car boot while the backpack continues as a 1.3 kg daypack. A front drain plug lets meltwater out without tipping the bag.

How does this differ from the four-person picnic backpack?

It is a smaller, lighter programme: 22 L body and 6 L cooler against 40 L and 8 L, a shoulder-and-sternum harness instead of a load-bearing waist belt, a zip-out tableware sleeve instead of a rigid drawer, and a 4.5-6.5 kg packed weight instead of 8.5-11.5 kg.

How much does a loaded bag weigh?

The kit alone is 2.4 kg and 1.28 kg empty. With food for two it reaches 4.5-5.5 kg, and with wine 6-6.5 kg. The 45 mm padded straps and 20 mm sternum strap handle that range comfortably; a waist belt is not needed below 7 kg.

What is the MOQ and what customisation is available on a two-person set?

500 pieces per style and colour. Options include full-colour front-panel print, embroidery, a custom lining, brushed zinc-alloy pulls, a leather-look PU grab tab, a contrast bound seam, a woven flag label, a custom blanket colour and gift-box or stuff-bag packing.

Are the plates, glasses and cutlery food-safe?

Plates are food-grade melamine-formaldehyde, cutlery is 18/8 stainless steel, glasses are food-contact PS, and the cooler liner is chlorine-free welded PEVA. Materials are supported by EU 10/2011 and FDA 21 CFR 177 declarations, and the optional blanket is OEKO-TEX 100 class II.

How long does sampling and production take for a two-person picnic backpack set?

A stock sample ships in 6-10 business days. A custom print with a bespoke lining and trim change needs 12-15 business days. Bulk production is 35-50 days from print-proof and lab-dip approval, followed by 100% cooler leak testing before gift packing.

For bulk orders, OEM/ODM programmes or a design consultation, contact the JUNYUAN BAGS sales team at service@junyuanbags.com or WhatsApp +86 17750020688. Send your target specification, annual volume and artwork to receive a quotation within two business days. The full Picnic Backpack range is listed in our Picnic Backpack category.