Tool Carry Bag

This electrician tool backpack is a made-to-order OEM/ODM programme from JUNYUAN BAGS, a bag manufacturer established on 2014-08-22 producing through affiliated and partner factories in Fujian, China. It combines a fully moulded water-resistant base, a ha

Description

Executive Summary: This electrician tool backpack is a made-to-order OEM/ODM programme from JUNYUAN BAGS, a bag manufacturer established on 2014-08-22 producing through affiliated and partner factories in Fujian, China. It combines a fully moulded water-resistant base, a hard-shell front pocket for safety glasses, fourteen tool pockets and eight tall driver sleeves in a 28 L body built from 1680D ballistic nylon. MOQ is 500 pieces per style and colour, sampling 6-10 business days, production 35-50 days, AQL 2.5 major / 4.0 minor inspection and a 12-month warranty.

At 42 x 30 x 20 cm and 1.55 kg empty, the pack is rated to 25 kg and stands upright on a moulded 8 mm PP base even when loaded unevenly. The tall sleeves take drivers up to 300 mm, and the front pocket is a 3 mm PP shell that protects glasses and meters rather than a padded fabric pouch.

Electrician tool backpack with moulded water-resistant base

What separates an electrician tool backpack from a tool bag

A tool bag is carried by hand and put down; a tool backpack is worn on a ladder, in a riser cupboard and across a site, which changes three things: the base has to survive being set down on gravel, the load has to sit against the spine instead of swinging, and the pockets have to hold tools upright so a driver does not fall out when the bag is inverted.

This pattern addresses all three. The moulded base is a separate 8 mm PP shell bonded to the body, the harness carries a 25 mm foam back panel, and every tool pocket is closed at the bottom with a bar-tacked seam.

  • Fully moulded 8 mm PP base, water-resistant, stands upright when loaded unevenly.
  • 3 mm PP hard front pocket for safety glasses, meters and small fragile kit.
  • 14 tool pockets plus 8 tall driver sleeves taking tools up to 300 mm.
  • 25 kg load rating with a 25 mm foam back panel and 50 mm padded shoulder straps.
  • Bar-tacked pocket seams so a loaded driver sleeve does not tear at the base.
28L heavy duty tool carry bag with hard front pocket

Specification

The stock specification below is what ships at 500 pieces. Pocket count and sleeve height are the two structural changes buyers request most; both need a new panel pattern and are quoted with a tooling line.

ParameterStandard build
Product typeElectrician tool carry backpack
Volume28 L
Dimensions42 x 30 x 20 cm
Empty weight1.55 kg
Shell1680D ballistic nylon, water-repellent finish
BaseMoulded 8 mm PP shell, water-resistant
Front pocket3 mm PP hard shell, 26 x 18 cm
Tool storage14 pockets, 8 tall driver sleeves to 300 mm
ZipsNo. 10 nylon coil, twin sliders
Harness50 mm padded straps, 25 mm foam back panel
Load rating25 kg evenly distributed
Packing1 pc per polybag, 10 pcs per 55 x 40 x 45 cm carton
MOQ500 pcs per style and colour
Sampling6-10 business days
Production35-50 days after sample approval
InspectionAQL 2.5 major / 4.0 minor, general level II
Warranty12 months against manufacturing defects

Base construction and why it is a separate part

The moulded base is not a coated panel; it is an 8 mm PP shell bonded to the body with a 12 mm flange and four rivets at the stress corners. That construction is what lets a loaded 20 kg pack stand on gravel without the fabric wicking water up from the ground.

The trade-off is weight: the moulded base adds about 210 g compared with a foam-and-600D base. Buyers targeting a sub-1.3 kg pack should specify the foam base version, which we quote as a separate build.

  • 8 mm PP moulded shell, bonded flange, 4 rivets at stress corners.
  • Water does not wick up the body from a wet floor in a 30-minute standing test.
  • Base adds about 210 g versus a foam-and-600D base.
  • Replaceable base feet available as a spare part for fleet buyers.
  • Impact test: 20 kg pack dropped 1 m onto concrete, 10 cycles, no seam failure.

Pocket and sleeve layout

Tool storage is dimensioned rather than described. The table below is the reference layout that ships in the stock build, and it is the plan we ask buyers to amend before sampling rather than after.

Storage elementSizeIntended tools
8 tall driver sleeves45 x 300 mm eachScrewdrivers, nut drivers, long bits
4 plier pockets90 x 160 mmPliers, cutters, crimpers
2 meter pockets110 x 190 mmMultimeters, testers
Hard front pocket260 x 180 x 40 mmSafety glasses, small meters
Front zip organiser260 x 180 mmConnectors, terminals, fuses
Rear document sleeve280 x 200 mmDrawings, job sheets
Side loop panel80 x 140 mmTape, fish rods, torch
Custom technician tool backpack with tall driver sleeves

OEM/ODM customisation options

Tool-bag customisation is driven by trade rather than fashion: an electrician, a plumber and a HVAC technician want different sleeve heights and pocket widths. Changing those is a panel-level change, not a finish change.

FeatureStandardCustom range
Shell fabric1680D ballistic nylon900D, 1200D poly, waxed canvas, RPET 1200D
BaseMoulded 8 mm PPFoam-and-600D lightweight build
LogoWoven labelEmbroidery, rubber patch, heat transfer, metal plate
Pocket plan14 pockets, 8 sleevesCustom count, width and sleeve height
Harness50 mm padded strapsPadded waist belt, chest strap, rigid frame sheet
ColourBlack, grey, hi-vis orangePantone match, 300 m minimum per colour
PackagingPolybagHang tag, retail box, fleet asset labelling

Sampling, production and inspection

A moulded base needs its own tool, so the sampling window on this pattern is 8-10 business days rather than the 6 days a soft tool tote needs. The mould is cut once and reused, which is why a repeat order runs faster than a first order.

StageDurationWhat happens
Artwork and spec sign-off2-3 business daysTech pack, pocket plan, Pantone locked
Sample making8-10 business daysIncludes base mould trial shot
Sample approval3-5 daysCourier transit excluded
Material sourcing7-10 daysRuns parallel with approval
Cutting and sewing25-32 days500-2,000 pcs per line
Final inspection1-2 daysAQL 2.5 major / 4.0 minor, level II
Packing and handover2-3 daysCarton marking, loading photos
Total production35-50 daysMeasured from sample approval

Carton data and fleet-order logistics

Trade buyers usually order once and reorder by trade, so the carton plan is built for pallet intake rather than retail display. Ten units per carton at 0.099 CBM keeps a 500-piece fleet order to 50 cartons and two pallets.

  • 1 pc per polybag, 10 pcs per 55 x 40 x 45 cm carton.
  • Carton gross weight 17.5 kg; 0.099 CBM per carton.
  • A 20 GP holds about 5,600 pcs; a 40 HQ about 13,500 pcs.
  • Fleet asset labelling and individual-name tagging available on request.
  • Spare base feet and strap sets can ship in the same carton at no extra freight.

Why this programme repeats with trade distributors

JUNYUAN BAGS has produced tool and equipment bags since 2014-08-22 through affiliated and partner factories, and this pack repeats because the pocket plan is dimensioned and therefore reproducible across colourways and reorders. Buyers comparing formats look at the electrician tool bag for a hand-carry option, or the custom tool bag with logo for a tote-and-backpack hybrid. The full range is in our tool bag category.

Frequently Asked Questions

What is an electrician tool backpack and who buys it?
It is a hands-free tool carry with upright pockets, a rigid base and a padded harness, built for technicians who climb, crawl and work in riser cupboards. Distributors, electrical contractors and safety-equipment brands buy this 28 L pattern, usually in fleet orders of 500 to 2,000 pieces.
Why does the base have to be moulded rather than padded?
A moulded 8 mm PP base stops water wicking up from a wet floor and keeps the pack standing when tools are loaded unevenly. In a 30-minute standing test on a wet surface the moulded base keeps the body dry, while a foam-and-600D base absorbs at the seam. The moulded version adds about 210 g.
How much weight can the tool backpack carry?
25 kg evenly distributed, with a 50 mm padded strap and 25 mm foam back panel. The impact test is a 20 kg pack dropped 1 m onto concrete for 10 cycles with no seam failure. Loads above 25 kg should move to a framed tote, because shoulder-carried weight above that limit is a handling risk on site.
What tools fit in the 14 pockets and 8 sleeves?
Sleeves are 45 x 300 mm and take screwdrivers, nut drivers and long bits up to 300 mm. Pockets cover pliers and cutters at 90 x 160 mm, meters at 110 x 190 mm, plus a 260 x 180 x 40 mm hard front pocket for safety glasses and a 260 x 180 mm organiser for connectors and fuses.
What is the MOQ and can a fleet order mix models?
500 pieces per style and colour for this pattern. A fleet order can mix models across patterns, but each pattern and colour is counted as its own 500-piece line. Volume pricing starts at 2,000 pieces per programme, where two colourways can run together on one line.
How long do sampling and production take on a moulded-base pack?
Sampling is 8-10 business days because the base mould needs a trial shot, against 6-10 days for a soft tote. Mass production is 35-50 days from sample approval. Repeat orders on the same mould and fabric lot typically run 30-38 days.
Which logo methods work on 1680D ballistic nylon?
Embroidery up to 90 x 45 mm, woven label, moulded rubber patch, heat transfer and a metal plate. Ballistic nylon takes embroidery well because the weave is dense, but a rubber patch is the more durable choice on a bag that is set down on concrete daily.
What does the 12-month warranty cover on a tool backpack?
Stitching, zips, base bonding, strap anchors and hardware for 12 months from delivery, excluding normal abrasion from job-site use. Claims need the order number plus photos of the defect and carton label; verified defects are credited or replaced in the next run, with 2 per cent of each order held as reference samples.

For bulk orders, OEM/ODM programmes or a custom design consultation, contact the JUNYUAN BAGS sales team at service@junyuanbags.com or WhatsApp +86 17750020688. Send your target specification, annual volume and artwork to receive a quotation within two business days. The full Tool Bag range is listed in our Tool Bag category, and related models in this programme are linked above.

Additional information

Logo Customization

MOQ 500pcs can accept logo customization