Private Label Guitar Bag Manufacturer: White Label & Custom Branding

Private Label & White Label · Guitar Bags · Quanzhou, China

Private label is not a logo added at the end of production. It is a set of decisions taken before the fabric is cut: which branding method goes on which panel, what the interior lining colour is, whether the zipper puller is a stock mould or yours, how the hardware is finished, and what the unit looks like when it comes out of the carton. Get those five right and the bag reads as your product. Get them wrong and it reads as a stock bag with a label sewn on. This page sets out the five branding methods with their real MOQ and mould costs, the lining, puller and hardware options behind them, the retail packaging that finishes the unit, what exclusivity actually covers, and the artwork we need to start. Your brand, our production — no Junyuan label on the bag unless you ask for one.

5
Branding Methods
500 pcs
MOQ per Style & Colour
6–10 Days
Branded Sample
0
Junyuan Labels on Your Order

What Private Label Means on a Guitar Bag — and What It Does Not

In the bag trade the words are used loosely, and the looseness costs buyers money. Private label means the product is made for you and carries only your brand: the pattern may be one of ours or one you specify, but the label, the hangtag, the barcode and the carton mark are yours, and nothing on the unit identifies the producer. White label means a design already in production is supplied to you with your label applied — the shell, the padding and the pocket layout are fixed, and what you choose is the colourway and the branding. ODM sits between them: a design we develop, refined for one buyer and held exclusive to that buyer. Stock plus a logo is the cheapest of the four and the one that most often disappoints, because a woven label on a stock bag does not change the bag.

For a guitar bag the distinction matters more than it does for a tote, because the product is judged in the hand. A buyer opening a gig bag sees three things before they read anything: the shell texture, the interior lining colour, and the zipper. Those three carry more brand signal than the logo does. That is why the branding conversation on this page does not start with the label — it starts with the decisions that make the bag look proprietary, and then places the label where it belongs.

ModelWhat You ChooseWhat Is FixedMOQBest For
Private label, your patternDimensions, padding, pocket layout, lining, trim, hardware, branding, packagingNothing — built to your specification500 pcs per style and colourBrands with an existing product or a clear design brief
Private label, our patternColourway, lining, trim, hardware, branding, packagingShell construction and pocket geometry500 pcs per style and colourBrands launching a first range without a technical pack
White labelColourway and branding onlyEverything else, including trim and hardware500 pcs per style and colourFast entry, test a category, limited design resource
ODM, held exclusiveDesign refinements, branding, packagingBase design, shared with no other buyer in your market500 pcs per style and colour, volume commitment for exclusivityRetailers and distributors building a signature line

One clarification that saves a round of emails: on a custom order we do not attach a Junyuan label, a Junyuan hangtag or a Junyuan barcode, and we do not print our name on the carton unless you ask us to. The legal manufacturer name appears where your market requires it — on a compliance label or in the documentation — not as retail branding. If your market needs an EU responsible person on the label, that block is printed from copy you approve, and our page on GPSR compliance for custom bags sets out what has to appear.

The Five Branding Methods, Compared by MOQ, Tooling and Durability

There are five methods we run on guitar bags, and the choice is driven by three things rather than by taste: the shell fabric, the volume per design, and whether the logo has to survive abrasion at the point where it sits. A silicone patch on a 1680D shell at the shoulder contact point will outlast a heat transfer by years. A heat transfer on the same shell will reproduce a six-colour graphic that no woven label can. Neither is better; they answer different questions.

MethodHow It Is AppliedMOQ per DesignMould / SetupDurabilityBest For
Woven labelJacquard-woven damask label, folded or end-fold, sewn into a seam or onto a panel500 pcs of bag; label loom run normally 1,000–2,000 pcs, so expect label overrunWeaving programme charge, one-off, quoted per design; no metal mouldHigh — survives washing, abrasion and flexingVolume programmes, classic brand look, side seam or interior placement
EmbroideryStitched directly into the shell or pocket panel, flat or 3D puff, up to 12 thread coloursNo separate MOQ beyond the 500 pcs bag orderDigitising fee, one-off, per design; no mouldHigh — the thread wears with the fabric rather than peeling off itPremium tonal branding, tonal-on-tonal logos, pocket or headstock panel
Silicone / PVC patchMoulded patch, 2–3mm, sewn or high-frequency welded onto a flat panel500–1,000 pcs per design depending on sizeMould charge, one-off, quoted per design and size; buyer-ownedVery high — 3D relief keeps its edgeModern streetwear-style branding, hard-wearing zones, high perceived value
Heat transfer printScreen-printed transfer film applied by heat press, up to 6 spot colours plus CMYKNo separate MOQ beyond the 500 pcs bag orderScreen charge per colour, one-offMedium — fine on flat panels, degrades on high-flex or coarse-weave areasMulti-colour graphics, fine detail, small runs, interior prints
Rubberised badgeMoulded rubber or soft PVC badge with raised or debossed relief, riveted or sewn500–1,000 pcs per designMould charge, one-off, quoted per design; buyer-ownedHigh — metal look without the weight or the scratch riskHeritage and premium lines, metal-look branding on a soft bag
Blank woven label sewn into the seam of a black guitar gig bag front pocket

A woven label in the pocket seam and a blank patch on the panel — the two placements most private label programmes use together.

Two practical rules follow from the table. The first is that tooling is a one-off cost, and it is charged once per design, not per order — so a mould paid on the first 500 pieces is amortised across every reorder. The second is that the fabric decides the method more than the artwork does. A coarse 1680D weave swallows fine heat transfer detail, so a line-art logo that looks sharp in a PDF comes back soft on the bag; the same artwork digitised for embroidery holds its edge because the stitch follows the outline. We will tell you which method your artwork will survive before you commit to tooling, and we would rather say it at quotation than at inspection.

Branding Beyond the Logo: Lining Colour, Zipper Pullers and Hardware Finish

This is the part buyers underestimate. A logo tells a customer what the brand is called; the interior tells them what the brand is like. A bag with a burgundy brushed-tricot lining, matte black hardware and a moulded puller reads as a designed product before the label is visible. The same bag with a black lining, nickel hardware and a stock cord puller reads as a catalogue item.

Custom lining colour is the cheapest proprietary signal available. It is a dye-lot decision rather than a tooling decision: we lab-dip to your Pantone TCX reference, you approve the dip, and the lining is dyed to it. Because lining is bought by the roll and cut per order, a lining colour change does not carry a mould fee — it carries a minimum fabric quantity, which is why it is usually paired with the 500-piece order rather than bought separately. The same logic applies to shell colour, webbing colour and stitch thread colour: each is a dye or a thread match, not a tool.

Zipper pullers are the exception. A cord puller with a branded rubber end needs no mould. A puller with your name moulded into it does, and the mould is charged once. On YKK sliders the puller is a separate component, so the practical route is a custom puller body on a standard YKK #8 or #10 slider — you get the branded puller without paying for a custom slider, and you keep YKK’s coil and slider reliability. For programs where the zipper is the visual signature, we can quote a full custom puller in zinc alloy with a plated or powder-coated finish.

ElementOptionsToolingVolume Note
Lining colour210D polyester, 190T taffeta, brushed tricot; matched to Pantone TCX by lab dipNone — dye lot onlyMinimum fabric quantity per colour; normally paired with the 500 pcs order
ZipperYKK #8 standard, YKK #10 reverse-coil for water resistance, nylon coilNoneReverse-coil costs more per metre and is quoted per size
Zipper pullerCord pull, rubber-ended cord pull, moulded logo puller, metal puller bodyMould charge for a moulded or metal puller body; none for cordMoulded puller normally 1,000 pcs per design; buyer-owned
Hardware finishMatte black oxide, antique brass, gunmetal, satin nickel, chrome, electrostatic powder coat matched to PantoneNone for plated stock finishes; colour match charge for a Pantone powder coatPowder coat is quoted with a salt-spray result; plating is quoted by finish
Webbing and trimPolyester or nylon webbing, PP webbing, leather-look trim, reflective pipingNone — dye or stock colourColour availability varies by width; we send the swatch card
Stitch threadPolyester core-spun, matched to shell, lining or Pantone; contrast stitching on requestNoneContrast stitching is a design decision, not a cost item
Open guitar gig bag showing burgundy contrast lining and a matte black rubberised zipper puller

A contrast lining and a rubberised puller: two decisions that cost less than tooling and do more for brand perception than the logo.

Hardware finish is where a private label programme is most often let down by the factory it did not choose carefully. A matte black oxide finish on zinc alloy will show wear at the strap anchor after a season; a powder coat will chip at the edge if the part was not deburred before coating. We quote finishes with a salt-spray result rather than a colour chip, because on a bag that travels, corrosion is the failure mode that reaches the customer, and it is invisible in a sample photo.

Retail Packaging: Polybag, Dust Bag, Hangtag, Barcode and Printed Colour Box

Packaging is the last 10% of the unit cost and the first thing the customer touches. It is also where private label orders most often arrive incomplete, because each component is a separate purchase from a separate supplier and nobody owns the set. We quote the set as one line item so the bag, the dust bag, the hangtag, the barcode and the carton all arrive matched.

ComponentStandard SpecificationMOQ / SetupNotes
PolybagLDPE 0.05mm, with or without euro hole, suffocation warning and recycling mark printed as requiredNo separate MOQ; print plate charge if the warning is printedAmazon requires a suffocation warning on bags above the stated opening size
Non-woven dust bag80–100gsm PP non-woven, drawstring, one or two spot colours screen printed500–1,000 pcs per print designThe cheapest way to make an unboxing feel considered; also reusable as a gig-bag liner
Printed hangtag350gsm C1S board, matte or gloss lamination, four-colour both sides, die-cut shape, cotton or jute string1,000 pcs per design typical for a print runCarries your barcode, size, material and care copy; die shape is a one-off cutting die
Barcode labelThermal transfer, UPC-A, EAN-13 or GTIN-14, applied to hangtag or polybagNo MOQ; number supplied by youThe GS1 prefix is yours, not ours; we print the number you issue and never generate one
FNSKU labelAmazon-assigned FNSKU, 1×3 inch, applied over the original barcodeNo MOQApplied at packing; requires the ASIN to be live before the carton is sealed
Printed colour box350gsm greyboard wrapped in 157gsm art paper, lamination, four-colour plus spot, die-cut and glued500–1,000 pcs; plate and cutting die chargesBest value on the second order, once the dieline is proven
Carton mark and packingFive-ply export carton, shipping mark, size and colour breakdown, silica gel desiccantNo MOQCarton mark should match the packing list line for line; this is what customs reads
Private label packaging set with polybag non-woven dust bag blank hangtag and printed colour box

The packaging set quoted as one item: polybag, non-woven dust bag, hangtag, barcode label and colour box.

Two packaging details cause most of the after-sales friction on private label orders, and both are avoidable at the brief. The first is the barcode: a brand that has not yet obtained a GS1 prefix will ask the factory to supply a number, and a factory-generated barcode will be rejected by every serious retailer. The prefix has to be bought by you before the hangtag is printed. The second is the polybag warning. Marketplaces require a suffocation warning on bags above a stated opening size, in the local language, and a bag that arrives without it is either rejected at the fulfilment centre or relabelled at your cost.

Exclusive Colourway, Mould Ownership and Artwork Rights

Private label is only worth paying for if the result stays private. Three things have to be settled in writing before the first order, and all three are simple to state.

Exclusive colourway. We do not sell your colourway and pattern combination to another buyer in your market. Where a programme needs a stronger commitment, we put it in writing: a specific shell colour, lining colour, trim combination and branding placement is held to you for an agreed term, typically twelve months, against an agreed annual volume. The scope is the combination, not the individual elements — we will still sell a black bag to somebody else, because a black bag is not a design.

Mould and tooling ownership. Every mould, plate, screen and weaving programme paid for by a buyer belongs to that buyer. It is stored at our cost, it is not used for any other customer’s order, and it is either returned or held for your future orders on request. This matters more than it sounds: a silicone patch mould or a puller mould is a physical asset, and a supplier that reuses it for a competing brand has given away the only part of your design that was hard to copy.

Artwork rights. Your logo, your dielines, your copy and your photography stay yours. We do not display your branding in our marketing, our catalogue or our social channels without written permission, and we sign an NDA where a programme requires it. Where we digitise, trace or redraw artwork for you — an embroidered logo from a raster file, a box dieline from a sketch — the resulting files are delivered to you and belong to you.

  • ✓ Written exclusivity on the colourway and trim combination, per market, for an agreed term.
  • ✓ Buyer-owned tooling: moulds, plates, screens and weaving programmes paid for by you are never used on another order.
  • ✓ No marketing use of your logo, product photos or brand name without written permission.
  • ✓ NDA on request, signed before the technical pack is shared.
  • ✓ Files returned: digitised embroidery, dielines and proofs are delivered to you, not held back.

What exclusivity does not cover is worth saying as plainly. We will not refuse to make a black guitar bag for another buyer, we will not withhold a standard construction, and we cannot police what a third factory does with a design that circulates publicly. What we can do is keep your specific combination out of our own order book, and that is the commitment we put in writing.

From Artwork to Approved Sample: The Private Label Sequence

A private label order is not slower than a stock order, but it has a different critical path, and most of the delay buyers experience comes from the front of it rather than the back. The sequence below is the one we run; the timings are the ones we hold.

  1. Brief and technical pack (day 0). The instrument the bag must fit, the style and quantity per colourway, and the branding method you want to explore. If you have a technical pack, send it; if you do not, we will draft the specification from your brief and send it back for confirmation.
  2. Branding and packaging quotation (2–3 working days). Unit price, tooling charges broken out separately, packaging components quoted as a set, and the lead time per line. Tooling is quoted one-off so you can see what a reorder will cost.
  3. Digital proof (1–2 days after artwork). A PDF mockup of the bag with your branding positioned on the actual panel, at the actual size, plus the hangtag and box dieline. This is where placement problems are caught — a logo that collides with a seam or a pocket curve is a proof problem, not a production problem.
  4. Lab dip and material approval (3–5 days, runs in parallel). Lining, shell and trim dips against your Pantone references, plus the hardware finish swatches. Nothing is cut until the dips are approved in writing.
  5. Tooling (5–12 days, runs in parallel). Weaving programme for a woven label, digitising for embroidery, mould for a silicone patch, rubber badge or puller. This is the step that surprises buyers: a new mould is not part of the 6–10 day sampling window, it runs before it.
  6. Branded sample (6–10 business days). Counted from written approval of the specification and the artwork, with tooling already in hand. The sample carries your label, your lining, your puller and your hardware, so what you approve is the product rather than a proxy for it.
  7. Sample approval and sealing (your side). The approved sample is sealed and becomes the inspection standard. Padding thickness, dimensions, stitch density and branding position are measured against it at inspection rather than judged by eye.
  8. Bulk production (35–50 days). After written sample approval, depending on material availability and order size. Pre-shipment inspection at AQL 2.5 major and 4.0 minor, with a photo report before the carton is sealed.
Blank dieline template colour swatch fan deck and label blanks on a bag design table

Dieline, colour dips and label blanks on the approval table — the three things that have to be signed off before cutting starts.

Two commercial notes belong here because they come up on every private label programme. Sampling is charged, and the sample charge is credited against the first bulk order once that order reaches the agreed value — a buyer who pays for three rounds of samples and orders nothing has cost us tooling time, and a buyer who orders is not asked to fund the sample twice. And tooling paid on the first order does not repeat: the second order is a bag, a label and a carton, not a mould.

  • ✓ Company established 2014, founder entered the bag trade in 2004. Long enough to know which branding method will still be reproducible at the same price on a reorder.
  • ✓ Affiliated and partner factories, matched to the construction. A guitar bag and a cooler bag do not run on the same line; we place each programme where that construction already runs.
  • ✓ One supplier for the bag and the packaging. Label, hangtag, dust bag, box and carton quoted together, so the set arrives matched instead of assembled from three vendors.
  • ✓ Tooling quoted separately and owned by you. No hidden amortisation in the unit price, and no mould reused on another buyer’s order.
  • ✓ AQL 2.5 documented before shipment. The inspection photo report reaches you before the container leaves, not after it lands.
  • ✓ Direct communication. [email protected] and +86 17750020688, answered by the people who quote and schedule the order.

Junyuan Bags is the trading name of QUANZHOU JUNYUAN COMMERCIAL AND TRADING CO., LTD., established in 2014, and its founder entered the bag trade in 2004. Production runs through affiliated and partner factories that specialise in the construction each programme needs, which is why sampling holds at 6–10 business days rather than the month a single-line factory needs to clear capacity for a new pattern. Your purchase order, invoice and shipping documents are issued in the legal entity name above.

Ready to Put Your Brand on a Guitar Bag?

Send the instrument the bag must fit, the quantity per style and colour, the branding method you have in mind and any artwork you already hold. You will have a written quotation with tooling broken out separately within 2–3 working days, and a branded sample in 6–10 days once artwork is approved.

Email: [email protected]  |  WhatsApp / Tel: +86 17750020688

Request a Private Label Quotation

Artwork Requirements: AI, EPS, PDF, Pantone and Dielines

Artwork is the single largest source of delay in a private label order, and it is almost always a format problem rather than a design problem. The list below is what we need to go straight to proof. Anything not on it can usually be worked around, but each workaround adds a day.

  • Vector files: Adobe Illustrator (.ai), .eps or .pdf, with fonts converted to outlines. A raster logo at 300dpi is usable for a hangtag and unusable for embroidery or a woven label.
  • Colour references: Pantone numbers for every spot colour, coated (C) for print on board and film, uncoated (U) where the substrate is absorbent, and Pantone TCX for fabric, lining and thread.
  • Minimum sizes: 0.25mm minimum line weight for print, 1.5mm minimum text height for a woven label, and a 1mm minimum stroke for embroidery before the stitch count makes the logo unreadable at 40mm wide.
  • Placement: state the panel and the position — centre of the front pocket, side seam at the lower third, headstock panel, interior lid. If you have a reference photo of a competitor’s placement, send it; it is faster than a description.
  • Dielines: for a printed box or a die-cut hangtag, send the dieline as a separate Illustrator layer, or ask us for ours and place your artwork into it. Do not scale a dieline to fit artwork.
  • Barcodes: supply the number and the symbology (UPC-A, EAN-13, GTIN-14), at 80% magnification or larger, with the quiet zone respected. We do not generate barcode numbers.
  • Copy for labels and hangtags: set exactly as supplied, including compliance wording, care instructions and market-specific language. We do not rewrite, translate or shorten copy without written instruction.
  • Embroidery files: .dst or .emb if you have them. If you do not, we digitise from your vector and send the stitch file back for approval before the sample is run.

The one thing we ask buyers not to do is approve artwork by eye on a screen. A logo that reads well at 300mm on a monitor is often illegible at 40mm on a woven label, and a Pantone that looks correct in RGB will not match a dyed lining. That is what the digital proof and the lab dip are for: they cost a few days and they remove the two failure modes that cannot be fixed after the fabric is cut. If you are still deciding how much of the process to own and how much to hand over, our page on the guitar bag OEM process walks the same sequence from the buyer’s side, and the custom guitar bag manufacturing page covers the construction and material options the branding sits on.

Frequently Asked Questions About Private Label Guitar Bags

Q1: What is the difference between private label and white label on a guitar bag?

Private label means the bag is made for you and carries only your brand, and you can change the specification: dimensions, padding, pocket layout, lining colour, hardware and packaging. White label means a design already in production is supplied with your label applied, and what you choose is limited to colourway and branding. In practice private label costs slightly more per unit and gives you a product nobody else can sell; white label is cheaper and faster and gives you a product several other brands can also sell. Both are available at the same 500-piece minimum per style and colour, and the choice is usually about how much of the design you want to own rather than about budget.

Q2: What is the MOQ for a private label guitar bag?

500 pieces per style and colour, which is the same threshold as our custom programmes. Mixed sizes within one style usually combine to reach it; mixed colours of the same style are quoted separately because fabric is bought per colour and the cutting setup repeats. Tooling is a separate one-off cost and does not change with quantity. Below 500 pieces we will quote a pilot order case by case rather than advertise a lower number we cannot hold at a competitive unit price.

Q3: What do the moulds cost, and who owns them?

Mould and setup charges are quoted per design and depend on size, relief depth and material, so we quote them as a line item rather than a fixed figure: a silicone or PVC patch and a rubberised badge are the highest, a moulded zipper puller sits in the middle, a heat transfer screen charge is per colour and the lowest, and a woven label needs a weaving programme rather than a mould. Every one of them is charged once per design and paid for by the buyer, which means the tooling belongs to the buyer: it is stored at our cost, it is never used on another customer’s order, and it is held for your reorders or returned on request.

Q4: Can you match my Pantone colour exactly?

We match to a lab dip you approve rather than to a number on a screen, and that distinction matters. For fabric, lining and thread we dip to Pantone TCX and send the physical dip for approval; for print on board or film we work to the Pantone coated or uncoated reference. A visual match within a normal commercial tolerance is achievable, and an exact numeric match is not, because dyed fabric varies by lot and the substrate is not paper. We will tell you where a reference cannot be held — very saturated greens and blues on polyester are the usual ones — before you build a colourway around it.

Q5: Should my logo be printed, embroidered or a patch?

It depends on the shell and where the logo sits. On a coarse 1680D weave, a heat transfer loses fine detail and a woven label or embroidery holds it; on a smooth 600D or waxed canvas, a transfer reproduces multi-colour artwork cleanly. At a shoulder or base contact point, a silicone patch or a rubberised badge will outlast either. Most private label programmes end up using two methods together — a woven label in the seam for identification and an embroidered or moulded mark on the pocket for presence — and we will tell you at quotation which of your artwork files will survive which method.

Q6: Can I have a custom lining colour and a branded zipper puller?

Yes to both, and they are the two changes that most improve how proprietary a bag feels. A lining colour is a dye-lot decision with no mould fee, subject to a minimum fabric quantity per colour, which is why it is normally paired with the 500-piece order. A moulded zipper puller with your name in it requires a mould, charged once, and typically runs at 1,000 pieces per design. On YKK sliders the puller is a separate component, so we fit a custom puller body to a standard YKK #8 or #10 slider — you get the branded puller without paying for a custom slider and without giving up YKK reliability.

Q7: What packaging can you supply for Amazon FBA or a retail chain?

Polybag with the suffocation warning printed as your marketplace requires, a non-woven dust bag, a printed hangtag carrying your barcode and copy, the barcode label itself, an Amazon FNSKU label applied over the original barcode, a printed colour box, and a five-ply export carton with a shipping mark that matches the packing list. The two things we cannot supply are the GS1 prefix behind the barcode and the ASIN behind the FNSKU — both have to be issued to you before the hangtag is printed. Retail chains usually add a carton-level label and a packing list per store, which we quote with the order.

Q8: Will you sell my design or colourway to another buyer?

Not the combination. We do not sell your colourway and pattern combination to another buyer in your market, and where a programme needs a firmer commitment we put it in writing for an agreed term, typically twelve months, against an agreed annual volume. The scope is the combination rather than the individual elements: we will still make a black guitar bag for another customer, because a black bag is not a design. Your logo, dielines and copy stay yours, we do not use your branding in our marketing without written permission, and we sign an NDA before the technical pack is shared where a programme requires it.

Q9: What artwork files do you need to start?

Illustrator, EPS or PDF vector files with fonts converted to outlines, plus Pantone references for every spot colour — coated for print, uncoated where the substrate is absorbent, and TCX for fabric, lining and thread. Tell us the panel and the position rather than describing it in words if you can send a reference photo. For a printed box or a die-cut hangtag, send the dieline on its own layer or ask for ours. If you only hold a raster logo we will trace it and send the vector back for approval before sampling, and if you need embroidery we will digitise and send the stitch file for approval too.

Q10: How long does a private label order take from artwork to delivery?

Quotation in 2–3 working days, a branded sample in 6–10 business days from written approval of the specification and artwork, and bulk production in 35–50 days after sample sign-off, plus 3–5 days for pre-shipment inspection and booking. Where a new mould is needed — a silicone patch, a rubber badge, a puller — add 5–12 days before sampling, because the tooling runs before the sample rather than during it. End to end, a first private label order typically lands 10–13 weeks after the brief, and a reorder is materially faster because the tooling, the dieline and the approved sample already exist.