2 Ball Bowling Bag

Description

2 Ball Bowling Bag: Ball Cradle, Shoe Bay, and Load Path

JUNYUAN BAGS manufactures the 2 Ball Bowling Bag as a custom OEM/ODM product for pro-shop chains and league program distributors who need a tote that survives a 30-week season. Production runs through affiliated and partner factories, so the shell fabric, the foam grade, and the shoe-bay venting can be specified as one build sheet.

The shell is 600D polyester with a 210D lining, and the ball compartment uses a moulded 15 mm EVA cradle rather than a flat padded floor. That cradle matters because a 16 lb ball resting on a flat floor puts its entire load on one stitch line at the base seam; in a cradle the load spreads across the moulded shell and the base seam sees roughly a third of that stress.

The shoe bay is a separate zippered compartment with two 8 mm ventilation grommets and a wipe-clean 210D lining, sized to US 15 at 13.0 × 8.0 × 5.5 inches. Keeping shoes out of the main compartment is the single most common buyer requirement in this category, because ball surface and shoe soles carry different dirt and the ball grip degrades when it picks up lane conditioner from a sole.

• Moulded 15 mm EVA ball cradle for two balls up to 16 lb each
• Separate shoe bay sized to US 15, with two 8 mm ventilation grommets
• Front accessory pocket with 3,600 cm³ capacity and a key clip
• Two 25 mm webbing carry handles with a hook-and-loop wrap
• Removable, adjustable 90–150 cm shoulder strap with 20 mm pad
• Reinforced base panel with five 12 mm studs for floor protection

Related bowling bags in the same collection: Bag For Bowling Ball | Single Bowling Ball Bag | Custom Bowling Ball Bag. Browse the full Bowling Bag category for current OEM/ODM options.

How the Shoe Bay and Ball Cradle Stay Independent

The shoe bay sits on the rear face and shares no fabric with the ball cradle — a 600D dividing wall and a 6 mm foam layer separate them. That construction prevents the two most common failure modes in this bag type: lane conditioner wicking into the ball compartment, and a wet sole soaking the cradle foam.

The bag also balances differently from a single-ball tote. With two 16 lb balls the centre of gravity sits roughly 40 mm behind the handle line, so the shoulder strap anchor is offset forward to keep the bag level when carried on one shoulder. Buyers who specify a trolley sleeve get a 180 mm rear sleeve that fits a standard 22 mm handle.

Order Data: Sampling, Mass Production, and Inspection

Sampling takes 6–10 business days after shell colour, cradle mould, and shoe-bay venting are confirmed. Mass production runs 35–50 days depending on decoration and order quantity, with AQL 2.5 major / 4.0 minor inspection before packing. Master cartons hold 8 units at 60 × 45 × 40 cm, and each carton is labelled with SKU, colour, and carton count.

League programs typically order in waves ahead of a season start, so buyers usually book a 500-piece opening run and a 300-piece replenishment. Both runs use the same cradle mould, which is why the replenishment does not require a second sampling round.

Frequently Asked Questions

What ball weights does this 2 ball bowling bag support?

Two balls up to 16 lb (7.3 kg) each, on a moulded 15 mm EVA cradle. The 38 kg gross carry rating covers two 16 lb balls, a pair of shoes, and a full accessory pocket.

How large is the shoe compartment on this bowling tote?

The shoe bay measures 13.0 × 8.0 × 5.5 inches, which fits US 15 men’s bowling shoes. It is separated from the ball cradle by a 600D wall and a 6 mm foam layer, and vents through two 8 mm grommets.

What is the MOQ for a custom logo on the 2 ball bowling bag?

MOQ is 500 pieces per style and colour for embroidery, screen print, heat transfer, or woven label. Volume pricing starts at the 1,000-piece tier and is quoted against confirmed artwork.

How long does sampling and mass production take?

Sampling takes 6–10 business days after shell and cradle confirmation. Mass production runs 35–50 days depending on decoration and quantity, with AQL 2.5 major / 4.0 minor inspection completed before packing.

Why use a moulded cradle instead of a padded flat base?

A ball on a flat base puts its full load on one base seam; a moulded cradle spreads it across the shell so that seam sees roughly a third of the stress. That is what keeps a 16 lb ball from wearing through the base over a season.

Can the bag be carried on one shoulder without tipping?

Yes. The shoulder strap anchor is offset forward of the load centre to compensate for the 40 mm rearward centre of gravity created by two balls, so the bag hangs level on a single shoulder.

Is a trolley sleeve available for travel?

Yes, as a specified option. The 180 mm rear sleeve fits a standard 22 mm luggage handle and is stitched into the same rear panel that carries the shoe bay, so no additional panel is added.

Which customization options are available beyond colour and logo?

Shell fabric, cradle mould, shoe-bay size, vent count, strap configuration, trolley sleeve, and carton printing are all open to specification. Wheeled variants are available as an ODM development.

For bulk orders, OEM/ODM enquiries, or custom design consultation, contact the JUNYUAN BAGS sales team at [email protected]. WhatsApp: +86 17750020688.