KEEP PERFECT Custom Lawyer Briefcase — OEM/ODM Leather Manufacturer

Category:

Description

Executive Summary: JUNYUAN BAGS, established 2014-08-22 and manufacturing through affiliated and partner factories in Quanzhou, builds this expanded-gusset case as a keep perfect lawyer briefcase custom logo programme for law firms, bar associations, notary offices and legal-sector corporate gifting. Minimum order is 500 pieces per style and colour, sampling 6-10 business days, bulk production 35-50 days, inspection to AQL 2.5 major / 4.0 minor, with a 12-month workmanship warranty.

Measured build: 43 × 32 × 12 cm closed (16.9 × 12.6 × 4.7 in), expanding to 16 cm on a two-position gusset, 16.5 L closed and 22.1 L expanded, 1.58 kg empty. Holds 6 cm of A4 binders or 4 legal pads plus a 15.6-inch laptop. Twin key locks on a 1.5 mm steel backing plate, a full-depth document wall, three file dividers, and a 130-160 cm detachable strap. Shell in 1.6 mm full grain or 1.4 mm saffiano split, with a 1.2 mm leather corner cap on all four base corners.

Custom lawyer briefcase in full grain leather with expanding gusset and twin key locks

The Expanding Gusset: Why Court Loads Are Not Office Loads

A lawyer’s carry changes by the day. On a document day the bag holds 6 cm of A4 binders; on a hearing day it holds the same binders plus a laptop, a charging kit and a spare shirt. A fixed-gusset briefcase either fails to close on the heavy day or looks empty on the light one.

This build solves that with a two-position gusset: a 12 cm closed profile that reads as a formal briefcase, expanding to 16 cm on a zip release, which takes the volume from 16.5 L to 22.1 L. The expansion zip is a #8 coil with a locking slider so the bag does not creep open under load.

ParameterClosedExpanded
External size43 × 32 × 12 cm43 × 32 × 16 cm
Usable volume16.5 L22.1 L
A4 binder stack4 cm6 cm
Legal pad capacity3 pads4 pads plus laptop
Laptop sleeve15.6-inch, 38 × 26 × 3 cmSame sleeve
Empty weight1.58 kg1.58 kg

Document Wall And File Dividers

The interior back wall is a full-depth document panel in 1.2 mm leather-faced board, which is what stops a stack of binders from bowing the shell. Three removable dividers sit on a hook-and-loop spine so a buyer can run one filing zone or four.

The dividers are labelled on a 40 × 15 mm index tab, which sounds trivial until a hearing morning requires pulling one matter out of four. Tabs are printed on a woven label so they do not rub off in a bag that is opened twenty times a day.

Expanded gusset of the lawyer briefcase holding A4 binders and a legal pad

Locks, Plates And Court Security

Courts and client sites increasingly require a lockable case, and a lock is only as good as its anchor. Both key locks are mounted through a 1.5 mm steel backing plate that spans the front panel, so a forced hasp deforms the plate rather than tearing through leather.

Two three-lever key locks are standard, keyed alike so one key opens both. A combination variant is available for firms that do not want a key register. The lock plate is finished in antique brass or gunmetal to match the hardware set.

  • Twin three-lever key locks, keyed alike, 2 keys per bag supplied
  • 1.5 mm steel backing plate spanning the front panel
  • Combination variant available, two three-dial hasps
  • Lock plate in antique brass or gunmetal
  • Spare key and lock cylinder available as service parts

Shell And Structure For A Heavy Daily Load

A 22 L expanded load at 10 kg will destroy a soft case within a season unless the structure is designed for it. This build uses 1.6 mm full grain over a 3 mm foam and 1 mm HDPE frame in both panels, a 5 mm base board on four brass feet, and 1.2 mm leather caps on all four base corners.

Handles are 24 mm rolled leather over a 2.5 mm fibre board, box-X stitched through a reinforcement plate and pull-tested at 25 kg for 30 seconds — the highest rating in our briefcase range, because a lawyer’s bag is carried full far more often than a designer briefcase.

ComponentSpecificationPurpose
Shell1.6 mm full grain or 1.4 mm saffianoAbrasion and shape
Panel frame3 mm foam + 1 mm HDPEResists bowing under binders
Base5 mm board + 4 brass feetStands loaded without sag
Corner caps1.2 mm leather, all four cornersFirst point of wear
Handle core2.5 mm fibre board25 kg pull rating

Branding For Firms: Crest, Wordmark And Nameplate

Legal-sector branding is conservative, and the most requested item is not a logo but a nameplate: a 70 × 20 mm debossed leather plate on the front panel carrying the firm name, with an optional 20 × 8 mm brass plate for a partner’s initials.

Firm crests work best as a 35 mm deboss or a 0.8 mm etched brass plate, because embroidery on leather puckers and a printed crest reads as promotional rather than professional. We hold the deboss die against the account so subsequent intake years match the first.

ItemSizeMethodTypical buyer
Firm nameplate70 × 20 mmDebossLaw firm intake
Partner initials20 × 8 mmBrass plate, rivetedIndividual gift
Firm crest35 mmDeboss or etched brassBar association
Interior label60 × 25 mmWovenPrivate label
Gusset wordmark45 × 12 mmDebossNotary office
Lawyer briefcase carried to court with document wall and file dividers visible

Inspection Gates For A Load-Bearing Case

Because this case is specified for weight, the gates lead with structure: panel deflection under a 10 kg load, handle pull, gusset zip creep and lock plate integrity. Leather checks follow.

A loaded case is dropped 1 m onto each of two base corners, then inspected for corner cap separation and frame deformation. Locks are cycled 200 times and the expansion zip 300 times. Final inspection follows ANSI/ASQ Z1.4 Level II at AQL 2.5 major / 4.0 minor.

CheckpointMethodAccept criteria
Panel deflection10 kg distributed load≤6 mm at mid-panel
Handle pull25 kg / 30 sNo stitch deformation
Corner drop1 m, two corners, loadedNo cap separation
Gusset zip creep300 cycles at 8 kgNo self-opening
Lock plate60 kg pull on haspNo plate deformation
Final inspectionANSI/ASQ Z1.4 Level IIAQL 2.5 major / 4.0 minor

Sampling, Bulk And Firm-Programme Packing

A stock-spec sample ships in 6-10 business days. A firm nameplate die adds 5 days, and a custom dye lot adds 12-16 business days at the tannery. Bulk production is 35-50 days from sample approval.

Firm programmes usually ship to multiple offices, so we pack 6 pieces per 48 × 36 × 16 cm master carton at 15 kg gross and can split a single order across up to five delivery addresses without changing the unit price.

StageDurationStarts when
Stock sample6-10 business daysSpec received
Nameplate die+5 daysFirm artwork vectorised
Custom dye lot12-16 business daysChip approved
Bulk production35-50 daysSample signed
Final inspection1-2 daysRun complete
Master carton6 pcs / carton, 15 kgPre-shipment

Related Models In This Programme

Buyers comparing formats usually shortlist custom locking leather briefcase alongside this model, and brown leather briefcase for a lighter daily carry for the adjacent specification. Both run on the same 500-piece minimum, the same 6-10 business day sampling cycle and the same AQL 2.5 major / 4.0 minor inspection standard, so a mixed order can ship as one consolidation.

Frequently Asked Questions

How much document capacity does the lawyer briefcase have?
Closed it holds 4 cm of A4 binders or three legal pads; expanded on the two-position gusset it takes 6 cm of binders and four pads, or three pads plus a 15.6-inch laptop. Volume moves from 16.5 L to 22.1 L, and the expansion zip has a locking slider so the bag does not creep open under load.
Why does a lawyer briefcase need an expanding gusset?
Because the daily load changes: a document day needs 6 cm of binders, a hearing day needs the same binders plus a laptop, charger and spare shirt. A fixed 12 cm gusset either will not close on the heavy day or looks empty on the light one, so this build runs 12 cm closed and 16 cm expanded.
What lock does it use and how is it anchored?
Twin three-lever key locks keyed alike, two keys supplied per bag, mounted through a 1.5 mm steel backing plate that spans the front panel so a forced hasp deforms the plate rather than tearing leather. A two-hasp combination variant is available for firms without a key register.
How is the case structured for a 10 kg daily load?
A 1.6 mm full grain shell over a 3 mm foam and 1 mm HDPE frame in both panels, a 5 mm base board on four brass feet, 1.2 mm leather caps on all four base corners, and 24 mm rolled handles over a 2.5 mm fibre board rated to a 25 kg pull test. Panel deflection is held to 6 mm or less under a 10 kg distributed load.
Can we put a firm nameplate on the front panel?
Yes, and it is the most requested item for legal-sector orders: a 70 × 20 mm debossed leather plate for the firm name, plus an optional 20 × 8 mm riveted brass plate for a partner’s initials. The deboss die is held against the account so later intake years match the first batch.
How long does a law firm briefcase programme take end to end?
A stock-spec sample ships in 6-10 business days. A firm nameplate die adds 5 days and a custom dye lot adds 12-16 business days at the tannery. Bulk production runs 35-50 days from sample approval, followed by 1-2 days of final inspection.
What is the minimum order and can it ship to multiple offices?
Minimum order is 500 pieces per style and colour. A single order can be split across up to five delivery addresses without changing the unit price, and each carton holds 6 pieces at 15 kg gross with the bag in a dust bag.
What testing and warranty apply to a load-bearing leather case?
Loaded corner drops from 1 m on two base corners, 25 kg handle pull for 30 seconds, 300 gusset zip cycles at 8 kg, 60 kg hasp pull, and 200 lock cycles. Inspection follows ANSI/ASQ Z1.4 Level II at AQL 2.5 major / 4.0 minor, with a 12-month workmanship warranty.

For bulk orders, OEM/ODM programmes or a design consultation, contact the JUNYUAN BAGS sales team at service@junyuanbags.com or WhatsApp +86 17750020688. Send your target specification, annual volume and artwork to receive a quotation within two business days. The full Briefcase range is listed in our Briefcase category.

Additional information

Logo Customization

MOQ 500pcs can accept logo customization