KEEP PERFECT Custom Custom Leather Briefcase — OEM/ODM Leather Manufacturer

Category:

Description

Executive Summary: JUNYUAN BAGS, established 2014-08-22 and producing through affiliated and partner factories, runs this locking business case as a keep perfect custom leather briefcase luxury programme — a specification-driven build where shell, dimension, lining, lock and interior layout are each chosen by the buyer. Minimum order is 500 pieces per style and colour, sampling 6-10 business days, bulk production 35-50 days, inspection to AQL 2.5 major / 4.0 minor, with a 12-month workmanship warranty.

Baseline build: 41 × 31 × 10 cm, 11.9 L, 1.35 kg empty, 15.6-inch padded sleeve, twin combination-lock hasps in antique brass or gunmetal, and a 4 mm foam-panelled frame that holds the silhouette when empty. Shell options run 1.4 mm full grain to 1.2 mm saffiano split; lining options run cotton twill, 210D jacquard or microfibre suede. Tooling for a bespoke dimension, a new lock or a custom lining print is quoted per project.

Custom leather briefcase with twin combination locks and a 15.6 inch laptop compartment

What “Custom” Actually Covers On This Build

On a stock briefcase, custom means a logo. On this model it means five independent variables: shell hide, external dimension, lining, lock hardware and interior layout. Each is chosen from a menu, and each carries its own tooling or minimum where the change leaves the existing pattern.

The practical rule we apply is that a change inside the existing pattern — lining, pocket layout, lock colour, logo — carries no new tooling. A change to the pattern itself — dimension, gusset depth, handle position — requires a new cutting die and a new sample round.

VariableOptionsTooling impact
Shell hideFull grain, saffiano split, pull-up, PUNone
External dimensionAny within 36-45 × 28-34 × 8-12 cmNew cutting die
LiningCotton twill, 210D jacquard, microfibre suedeNone; print needs a screen
LockTwin combination hasp, key lock, tuck lockHasp cut if new footprint
Interior layout3 preset layouts + bespokeNew pattern piece
LogoDeboss, foil, plate, patchBrass die

The Lock: Combination, Key Or Tuck

A locking briefcase is bought for a reason, so the lock is the part we test hardest. The twin combination hasp is the default: two three-dial locks, 1,000 combinations each, die-cast zinc bodies with a brass cam, rated to 200 open-close cycles in test and 60 kg of pull on the hasp plate.

Key locks suit corporate security policies where a key register exists; tuck locks suit markets where a visible lock reads as over-engineered. Whichever is chosen, the hasp plate is anchored through a 1.5 mm steel backing plate inside the gusset, because a lock that pulls out of leather is worse than no lock at all.

Bespoke leather briefcase interior showing document divider and lining choice

Interior Layouts: Three Presets And One Bespoke Route

Layout A is document-first: a full-depth A4 divider, a 15.6-inch sleeve behind it and two pen loops. Layout B is tech-first: a 15.6-inch sleeve against the back panel, a 20 × 12 cm charger pouch, a phone slip and a cable channel. Layout C is sample-case: three removable hook-and-loop dividers on a 5 cm pitch.

Bespoke layouts are drawn from the buyer’s own kit list. We ask for the items and their dimensions, produce a paper pattern, and confirm it against the physical items before cutting leather.

  • Layout A — document-first: A4 divider, rear laptop sleeve, 2 pen loops
  • Layout B — tech-first: rear sleeve, charger pouch, phone slip, cable channel
  • Layout C — sample-case: 3 removable dividers on a 5 cm pitch
  • Bespoke — paper pattern confirmed against the buyer’s physical kit
  • All layouts keep a 2 cm foam channel between sleeve and back panel

Lining, Frame And Silhouette Control

A leather briefcase that sags looks cheap regardless of the hide, so the frame matters as much as the shell. This build uses a 4 mm foam-panelled frame laminated to a 0.8 mm HDPE sheet in the front and back panels, which holds the silhouette when the bag is empty and stops the gusset collapsing inward.

Lining is bonded to the frame rather than floating, which removes the pucker that appears at the gusset fold after a few weeks of use. Microfibre suede lining is the premium option and adds 90 g; 210D jacquard is the durable mid option; cotton twill is the classic choice for a formal briefcase.

ComponentSpecificationEffect
Front/back frame4 mm foam + 0.8 mm HDPEHolds shape when empty
Gusset2.5 mm foam, bonded liningNo pucker at the fold
Lining bondSpray adhesive, full coverageNo floating lining
Base5 mm board + 4 brass feetStands without sagging
Handle core2.5 mm fibre boardNo roll collapse under load

Logo Programmes For A Luxury Briefcase

Luxury positioning changes the branding calculus: a large front-panel logo usually reduces perceived value, so most buyers specify a 30-40 mm deboss on the front panel or a discreet plate on the gusset. Foil blocking is reserved for saffiano and PU shells.

For private-label programmes we also produce the internal label, the dust bag print and the hangtag, so the unboxing reads as one brand rather than a bag with an aftermarket tag.

MethodRecommended sizePlacementNotes
Deboss30-40 mmFront panel, gussetDefault for luxury positioning
Foil block25-35 mmFront panelSaffiano and PU only
Metal plate20-30 mmGusset or front cornerRiveted, 0.8 mm brass
Leather patch50 × 20 mmBack panelReplaceable, tonal
Interior label60 × 25 mmLining, sleeve edgeWoven, low tooling
Custom briefcase hardware detail with gunmetal lock hasps and brass feet

Inspection Gates For A Locking Case

A locking briefcase adds mechanical failure modes to the leather ones, so the gate list includes lock function, hasp alignment and key or dial operation alongside shade match and stitch density.

Locks are cycled 200 times per sampled unit and dials are checked for the full combination range on 5 units per lot. Hasp plates are pull-tested at 60 kg. Final inspection follows ANSI/ASQ Z1.4 Level II at AQL 2.5 major / 4.0 minor.

CheckpointMethodAccept criteria
Lock cycle200 open-closeNo bind, no cam wear
Dial functionFull range, 5 pcs/lotEvery combination engages
Hasp alignmentGauge, closed position≤1 mm offset
Hasp pull60 kgNo plate movement
Frame rigidityEmpty-bag deflection≤5 mm at mid-panel
Final inspectionANSI/ASQ Z1.4 Level IIAQL 2.5 major / 4.0 minor

Sampling, Tooling And Bulk Timeline

A stock-spec sample ships in 6-10 business days. A bespoke dimension or layout adds a pattern round, typically 12-18 business days, and a new lock footprint adds 15 days for the die-cast tool. Bulk production is 35-50 days from sample approval.

Six pieces pack per 46 × 35 × 15 cm master carton at 13 kg gross, each in a dust bag with the lock taped to prevent transit dialling.

StageDurationStarts when
Stock-spec sample6-10 business daysSpec received
Bespoke pattern round12-18 business daysPaper pattern approved
New lock tool+15 daysLock drawing signed
Bulk production35-50 daysSample signed
Final inspection1-2 daysRun complete
Master carton6 pcs / carton, 13 kgPre-shipment

Related Models In This Programme

Buyers comparing formats usually shortlist brown leather briefcase in pull-up hide alongside this model, and lawyer briefcase with an expanding gusset for the adjacent specification. Both run on the same 500-piece minimum, the same 6-10 business day sampling cycle and the same AQL 2.5 major / 4.0 minor inspection standard, so a mixed order can ship as one consolidation.

Frequently Asked Questions

What can be customised on a custom leather briefcase?
Five variables: shell hide (full grain, saffiano split, pull-up, PU), external dimension within 36-45 × 28-34 × 8-12 cm, lining (cotton twill, 210D jacquard, microfibre suede), lock type, and interior layout. Logo method is a sixth. Changes inside the existing pattern carry no tooling; a dimension or gusset change requires a new cutting die.
Which lock type should we specify?
Twin combination hasps are the default, with two three-dial locks at 1,000 combinations each and die-cast zinc bodies rated to 200 cycles and 60 kg of hasp pull. Key locks suit organisations with a key register, and tuck locks suit markets where a visible lock reads as over-engineered. Every hasp is anchored through a 1.5 mm steel backing plate.
How does the bag keep its shape when empty?
The front and back panels carry a 4 mm foam and 0.8 mm HDPE laminated frame, the gusset uses 2.5 mm foam with bonded lining, and the base runs a 5 mm board on four brass feet. Empty-bag deflection at mid-panel is held to 5 mm or less in inspection.
What is the minimum order for a bespoke dimension?
Minimum order is 500 pieces per style and colour for any configuration. A bespoke dimension or interior layout is quoted with a one-off cutting die, and the die is held against the account so repeat orders of the same pattern carry no second tooling charge.
How is a luxury logo best applied?
A 30-40 mm brass deboss on the front panel or a discreet plate on the gusset, because a large front logo reduces perceived value in luxury positioning. Foil blocking is limited to saffiano and PU shells. We also produce the interior woven label, dust bag print and hangtag so the unboxing reads as one brand.
How long does a bespoke build take from sample to shipment?
A stock-spec sample ships in 6-10 business days. A bespoke dimension or layout adds a pattern round of 12-18 business days, and a new lock footprint adds 15 days for the die-cast tool. Bulk production then runs 35-50 days from sample approval.
What testing is applied to the locks and hasps?
Locks are cycled 200 times per sampled unit, dials are checked across the full combination range on 5 units per lot, hasp plates are pull-tested at 60 kg, and hasp alignment is gauged at 1 mm maximum offset. Final inspection runs to ANSI/ASQ Z1.4 Level II at AQL 2.5 major / 4.0 minor with a 12-month workmanship warranty.
Can the interior be built around our own sample kit?
Yes. Layout C already provides three removable dividers on a 5 cm pitch, and for a bespoke layout we ask for the buyer’s item list and dimensions, cut a paper pattern, and confirm it against the physical items before any leather is cut.

For bulk orders, OEM/ODM programmes or a design consultation, contact the JUNYUAN BAGS sales team at service@junyuanbags.com or WhatsApp +86 17750020688. Send your target specification, annual volume and artwork to receive a quotation within two business days. The full Briefcase range is listed in our Briefcase category.

Additional information

Logo Customization

MOQ 500pcs can accept logo customization